QL200 PIC DEVELOPMENT BOARD
天翼商城,最专业的单片机电子商城，网站：www.tymall.net
http://www.tymall.net/ql200-pic-development-board-p-37.html
1.1 QL200 PIC DEVELOPMENT BOARD Introduction
QL200 is an integrated demo system for study and development of PIC Microcontroller,which is provided with four functions of experimental instrument,programmer,simulation interface and ICSP download cable.Enclosed with control CPU and combined with programming software which has independent intellectual property rights,the system is able to support over 90 percent of the experiments and development practices of PIC Microcontroller.
To easily study and develop all series of PIC Microcontroller's,only a set of QL200 demo system and a computer are needed.Based on programming functions,abundant on-board hardware resources,flexible expansion,free resource distribution,and ICSP download function for customer target board,QL200 can not only satisfy the demands of a beginner in Microcontroller study,but also meet the requirements of engineers in development of Microcontroller.In addition to a study & experimental board,QL200 is also a demo board of Microcontroller integrated with multiple resources.
1.2 Characteristics:
* Abundant on-board resources:LED,digital tube,key-press,keyboard matrix,character LCD,graphic LCD,A/D converter,D/A converter,SPI&IIC communication,USART serial communication,DS18B20 digital temperature measurement,DS1302 clock,infrared remote control encoder,voice program and etc.
* Full combination of PIC chips available for programming supporting and experiment development:on-board chip socket for PIC Microcontroller of 8PIN,14PIN,18PIN,20PIN,28PIN,and40PIN,on-board PIC10 series,PIC16F57 chip socket,jumper for selection of various oscillation modes,auto-replacement of crystal oscillation of different frequency.
* Open modular design:All modules can be on/off controlled by DIP switch.Each module is designed to connect to I/O port of Microcontroller.Connection of module with any port of Microcontroller is conveniently achieved through dupont thread.Connection to preset port is available by using DIP switch without dupont thread.All I/O ports are open externally with output socket.Expansion is easily accomplished.
* Perfect examples:Each module is equipped with at least one detailed example from easy ones to complicated ones.Beginners are enabled to master all types of programming step by step.
* Powerful on-board programming system:Programming over 90 percent of PIC Microcontroller's.Enclosed with ICSP download cable.Direct ICSP programming for Microcontroller of external target board.
* On-board simulation debugging interface:direct connection to ICD1/ICD2/MCD1/MCD2 in circuit debugger.
* Powerful programming control software:Programming control software has entire independent intellectual property rights and covers all operating functions of programmer,with the following characteristics
1. Compatible for operating systems including Windows 98,Windows 2000/NT,Windows XP and Windows 2003;
2. Programming interface in English and Chinese,on-line help system,convenient for user operation;
3. Programming counting function of software;
4. Serial number auto-increment function;
5. Voice indication during programming;
6. Auto-inspection of programming hardware,auto-inspection of software and setup of programming hardware during start-up,operation without manual setup;
7. Monitoring of programming data;Based on check summing,available to find immediately if programming data is changed or not.Formula of checksum is subject to definition of Microchip;
8. Read the content in chip programming area easily;
9. Program supports *.HEX or *.BIN files;
10. Fill function of buffer;
11. Auto-protection of calibration value of chip clock against erasion;
12. Directly program the BIN files obtained from decoding of Microcontroller without making any setup.
* In addition to above characteristics,many humanized functions are designed in the development of QL200,For examples:
o Over-load protection function:When there is over load in the demo system,the protection system will automatically start to avoid any damage of elements.After fault is corrected,the board will recover to work.
o Auto-load of changed file function:To achieve seamless integration with MPLAB IDE and other development software,the changed current target code is inspected automatically and then is transferred into the updated file automatically.This function offers great convenience for study and development,which avoids the trouble in repeating load of target code.
o Function to identify the figuration bit and EEPROM in the file automatically:When we write the configuration bit information and EEPROM data in the program,otherwise setup is not needed for programming.This function saves much time for regular change in program debugging and avoids the setup requirement for each program change.
o On-board CPU on-line upgrade function:It is available to download the updated programming software and run to upgrade hardware,which will upgrade on-board CPU to the updated version so that it can support more new devices.
1.3 QL200 can support the following devices for programming and experimental development:
* PIC10FXX：PIC10F200 PIC10F202 PIC10F204 PIC10F206 PIC10F220 PIC10F222
* PIC12XX：PIC12C508 PIC12C508A PIC12C509 PIC12C509A PIC12C671 PIC12C672 PIC12CE518 PIC12CE519 PIC12CE673 PIC12CE674 PIC12F508 PIC12F509 PIC12F629 PIC12F635 PIC12F675 PIC12F683 PIC12F615 PIC12HV615
* PIC16XX：PIC16C505 PIC16C554 PIC16C558 PIC16C61 PIC16C62 PIC16C62A PIC16C62B PIC16C62A PIC16C62B PIC16C63 PIC16C63A PIC16C64 PIC16C64A PIC16C65 PIC16C65A PIC16C65B PIC16C66 PIC16C66A PIC16C67 PIC16C620 PIC16C620A PIC16C621 PIC16C621A PIC16C622 PIC16C622A PIC16C71 PIC16C72 PIC16C72A PIC16C73 PIC16C73A PIC16C73B PIC16C74 PIC16C74A PIC16C74B PIC16C76 PIC16C77 PIC16C710 PIC16C711 PIC16C712 PIC16C716 PIC16C745 PIC16C765 PIC16C773 PIC16C774 PIC16C83 PIC16C84 PIC16F505 PIC16F506 PIC16F54 PIC16F57 PIC16F627 PIC16F616 PIC16HV616 PIC16LF627A PIC16F627A PIC16F628 PIC16F628A PIC16LF628A PIC16F630 PIC16F636 PIC16F639 PIC16F648A PIC16F676 PIC16F683 PIC16F684 PIC16F685 PIC16F687 PIC16F688 PIC16F689 PIC16F690 PIC16F716 PIC16F72 PIC16F73 PIC16F74 PIC16F76 PIC16F77 PIC16F737 PIC16F747 PIC16F767 PIC16F777 PIC16F785 PIC16F83 PIC16F84 PIC16F84A PIC16F87 PIC16F88 PIC16F818 PIC16F819 PIC16F870 PIC16F871 PIC16F872 PIC16F873 PIC16F873A PIC16F874 PIC16F874A PIC16F876 PIC16F876A PIC16F877 PIC16F877A PIC16F913 PIC16F914 PIC16F916 PIC16F917 PIC16F882 PIC16F883 PIC16F884 PIC16F886 PIC16F887
* PIC18FXX：PIC18F242 PIC18F248 PIC18F252 PIC18F258 PIC18F442 PIC18F448 PIC18F452 PIC18F458 PIC18F1220 PIC18F1320 PIC18F2220 PIC18F2221 PIC18F2320 PIC18F2321 PIC18F2331 PIC18F2410 PIC18F2420 PIC18F2431 PIC18F2450 PIC18F2455 PIC18F2480 PIC18F2510 PIC18F2515 PIC18F2520 PIC18F2525 PIC18F2550 PIC18F2580 PIC18F2585 PIC18F2610 PIC18F2620 PIC18F2680 PIC18F4220 PIC18F4221 PIC18F4320 PIC18F4321 PIC18F4331 PIC18F4410 PIC18F4420 PIC18F4431 PIC18F4450 PIC18F4455 PIC18F4480 PIC18F4510 PIC18F4515 PIC18F4520 PIC18F4525 PIC18F4550 PIC18F4580 PIC18F4585 PIC18F4610 PIC18F4620 PIC18F4680
1.4 Board Resource Introduction:
1. Switch between power supply thru USB or external power supply.
2. 128*64LCD and 16*2 LCD module
3. 32 LEDs are provided.
4. 4x4 matrix keyboard module
5. 8 buttons are provided.
6. Potentionmeters for simulating analog voltage input.
7. IIC(24C01/02 EEPROM)communication module
8. SPI(93C46 EEPROM)communication module
9. Real Time Clock DS1302 with battery supply.
10. Reset circuit.
11. ICD2 connector for customers who want to use it.
12. On-board programming module(USB Communication)
13. Chip socket and system clock selection
14. Digital LED display with 6bit 7-segment
15. Remote control receiver and decoder module
16. Digital thermometer DS1820 for temperature measurement from -55°C to 125°C.
17. Beeper experimental modlie
18. RS-232 communication for connection with a PC or any other device with a DB9 connector
19. Serial 10-bit voltage DA(TLC5615) converter for applications in measure - regulating devices.
20. All pins are taken out on IDC10 connectors to make them available for further connections.
21. Stepper Motor Driver Module
22. SD/MMC card Read/Write Module
23. Free Chip PIC16F877A-I/P
1.5 The auction includes
* QL200 PIC DEVELOPMENT Board +
* USB cable
* ICSP cable
* RS232 Cable
* 16F877A Chip
* 1602 LCD with Yellow backlight
* CD-ROM(Programmer Driver,English version PDF User manual,QL200 Layout,QL200 Board Schematic,Sample code(C/ASM),MPLAB 7.50.)
* Compatible for OS including Windows 98,Windows 2000/NT,Windows XP,Windows 2003 and Vista
* Dupont thread expansion connection 20x wire
* 12864-Graphic LCD Display Yellow Backlight
* 10-bit D/A converter TLC5615(DIP8 package)*1
* DS18B20(DS1820)Temperature Sensor(TO-92 package)*1
Sample with C and ASM Program sources code as below:
* DS1820
* Buzzer
* 128x64 GLCD(See the following Photos)
* 1602 LCD(See the following Photos)
* 93C46
* 24C02
* 4x4 Key testing
* 8x LED
* 7x segment
* ADC/DAC
* Infrared Remote
* Stepper motor driver
* MMCSD card Read/Write(Only have C)
http://www.tymall.net/ql200-pic-development-board-p-37.html
1.1 QL200 PIC DEVELOPMENT BOARD Introduction
QL200 is an integrated demo system for study and development of PIC Microcontroller,which is provided with four functions of experimental instrument,programmer,simulation interface and ICSP download cable.Enclosed with control CPU and combined with programming software which has independent intellectual property rights,the system is able to support over 90 percent of the experiments and development practices of PIC Microcontroller.
To easily study and develop all series of PIC Microcontroller's,only a set of QL200 demo system and a computer are needed.Based on programming functions,abundant on-board hardware resources,flexible expansion,free resource distribution,and ICSP download function for customer target board,QL200 can not only satisfy the demands of a beginner in Microcontroller study,but also meet the requirements of engineers in development of Microcontroller.In addition to a study & experimental board,QL200 is also a demo board of Microcontroller integrated with multiple resources.
1.2 Characteristics:
* Abundant on-board resources:LED,digital tube,key-press,keyboard matrix,character LCD,graphic LCD,A/D converter,D/A converter,SPI&IIC communication,USART serial communication,DS18B20 digital temperature measurement,DS1302 clock,infrared remote control encoder,voice program and etc.
* Full combination of PIC chips available for programming supporting and experiment development:on-board chip socket for PIC Microcontroller of 8PIN,14PIN,18PIN,20PIN,28PIN,and40PIN,on-board PIC10 series,PIC16F57 chip socket,jumper for selection of various oscillation modes,auto-replacement of crystal oscillation of different frequency.
* Open modular design:All modules can be on/off controlled by DIP switch.Each module is designed to connect to I/O port of Microcontroller.Connection of module with any port of Microcontroller is conveniently achieved through dupont thread.Connection to preset port is available by using DIP switch without dupont thread.All I/O ports are open externally with output socket.Expansion is easily accomplished.
* Perfect examples:Each module is equipped with at least one detailed example from easy ones to complicated ones.Beginners are enabled to master all types of programming step by step.
* Powerful on-board programming system:Programming over 90 percent of PIC Microcontroller's.Enclosed with ICSP download cable.Direct ICSP programming for Microcontroller of external target board.
* On-board simulation debugging interface:direct connection to ICD1/ICD2/MCD1/MCD2 in circuit debugger.
* Powerful programming control software:Programming control software has entire independent intellectual property rights and covers all operating functions of programmer,with the following characteristics
1. Compatible for operating systems including Windows 98,Windows 2000/NT,Windows XP and Windows 2003;
2. Programming interface in English and Chinese,on-line help system,convenient for user operation;
3. Programming counting function of software;
4. Serial number auto-increment function;
5. Voice indication during programming;
6. Auto-inspection of programming hardware,auto-inspection of software and setup of programming hardware during start-up,operation without manual setup;
7. Monitoring of programming data;Based on check summing,available to find immediately if programming data is changed or not.Formula of checksum is subject to definition of Microchip;
8. Read the content in chip programming area easily;
9. Program supports *.HEX or *.BIN files;
10. Fill function of buffer;
11. Auto-protection of calibration value of chip clock against erasion;
12. Directly program the BIN files obtained from decoding of Microcontroller without making any setup.
* In addition to above characteristics,many humanized functions are designed in the development of QL200,For examples:
o Over-load protection function:When there is over load in the demo system,the protection system will automatically start to avoid any damage of elements.After fault is corrected,the board will recover to work.
o Auto-load of changed file function:To achieve seamless integration with MPLAB IDE and other development software,the changed current target code is inspected automatically and then is transferred into the updated file automatically.This function offers great convenience for study and development,which avoids the trouble in repeating load of target code.
o Function to identify the figuration bit and EEPROM in the file automatically:When we write the configuration bit information and EEPROM data in the program,otherwise setup is not needed for programming.This function saves much time for regular change in program debugging and avoids the setup requirement for each program change.
o On-board CPU on-line upgrade function:It is available to download the updated programming software and run to upgrade hardware,which will upgrade on-board CPU to the updated version so that it can support more new devices.
1.3 QL200 can support the following devices for programming and experimental development:
* PIC10FXX：PIC10F200 PIC10F202 PIC10F204 PIC10F206 PIC10F220 PIC10F222
* PIC12XX：PIC12C508 PIC12C508A PIC12C509 PIC12C509A PIC12C671 PIC12C672 PIC12CE518 PIC12CE519 PIC12CE673 PIC12CE674 PIC12F508 PIC12F509 PIC12F629 PIC12F635 PIC12F675 PIC12F683 PIC12F615 PIC12HV615
* PIC16XX：PIC16C505 PIC16C554 PIC16C558 PIC16C61 PIC16C62 PIC16C62A PIC16C62B PIC16C62A PIC16C62B PIC16C63 PIC16C63A PIC16C64 PIC16C64A PIC16C65 PIC16C65A PIC16C65B PIC16C66 PIC16C66A PIC16C67 PIC16C620 PIC16C620A PIC16C621 PIC16C621A PIC16C622 PIC16C622A PIC16C71 PIC16C72 PIC16C72A PIC16C73 PIC16C73A PIC16C73B PIC16C74 PIC16C74A PIC16C74B PIC16C76 PIC16C77 PIC16C710 PIC16C711 PIC16C712 PIC16C716 PIC16C745 PIC16C765 PIC16C773 PIC16C774 PIC16C83 PIC16C84 PIC16F505 PIC16F506 PIC16F54 PIC16F57 PIC16F627 PIC16F616 PIC16HV616 PIC16LF627A PIC16F627A PIC16F628 PIC16F628A PIC16LF628A PIC16F630 PIC16F636 PIC16F639 PIC16F648A PIC16F676 PIC16F683 PIC16F684 PIC16F685 PIC16F687 PIC16F688 PIC16F689 PIC16F690 PIC16F716 PIC16F72 PIC16F73 PIC16F74 PIC16F76 PIC16F77 PIC16F737 PIC16F747 PIC16F767 PIC16F777 PIC16F785 PIC16F83 PIC16F84 PIC16F84A PIC16F87 PIC16F88 PIC16F818 PIC16F819 PIC16F870 PIC16F871 PIC16F872 PIC16F873 PIC16F873A PIC16F874 PIC16F874A PIC16F876 PIC16F876A PIC16F877 PIC16F877A PIC16F913 PIC16F914 PIC16F916 PIC16F917 PIC16F882 PIC16F883 PIC16F884 PIC16F886 PIC16F887
* PIC18FXX：PIC18F242 PIC18F248 PIC18F252 PIC18F258 PIC18F442 PIC18F448 PIC18F452 PIC18F458 PIC18F1220 PIC18F1320 PIC18F2220 PIC18F2221 PIC18F2320 PIC18F2321 PIC18F2331 PIC18F2410 PIC18F2420 PIC18F2431 PIC18F2450 PIC18F2455 PIC18F2480 PIC18F2510 PIC18F2515 PIC18F2520 PIC18F2525 PIC18F2550 PIC18F2580 PIC18F2585 PIC18F2610 PIC18F2620 PIC18F2680 PIC18F4220 PIC18F4221 PIC18F4320 PIC18F4321 PIC18F4331 PIC18F4410 PIC18F4420 PIC18F4431 PIC18F4450 PIC18F4455 PIC18F4480 PIC18F4510 PIC18F4515 PIC18F4520 PIC18F4525 PIC18F4550 PIC18F4580 PIC18F4585 PIC18F4610 PIC18F4620 PIC18F4680
1.4 Board Resource Introduction:
1. Switch between power supply thru USB or external power supply.
2. 128*64LCD and 16*2 LCD module
3. 32 LEDs are provided.
4. 4x4 matrix keyboard module
5. 8 buttons are provided.
6. Potentionmeters for simulating analog voltage input.
7. IIC(24C01/02 EEPROM)communication module
8. SPI(93C46 EEPROM)communication module
9. Real Time Clock DS1302 with battery supply.
10. Reset circuit.
11. ICD2 connector for customers who want to use it.
12. On-board programming module(USB Communication)
13. Chip socket and system clock selection
14. Digital LED display with 6bit 7-segment
15. Remote control receiver and decoder module
16. Digital thermometer DS1820 for temperature measurement from -55°C to 125°C.
17. Beeper experimental modlie
18. RS-232 communication for connection with a PC or any other device with a DB9 connector
19. Serial 10-bit voltage DA(TLC5615) converter for applications in measure - regulating devices.
20. All pins are taken out on IDC10 connectors to make them available for further connections.
21. Stepper Motor Driver Module
22. SD/MMC card Read/Write Module
23. Free Chip PIC16F877A-I/P
1.5 The auction includes
* QL200 PIC DEVELOPMENT Board +
* USB cable
* ICSP cable
* RS232 Cable
* 16F877A Chip
* 1602 LCD with Yellow backlight
* CD-ROM(Programmer Driver,English version PDF User manual,QL200 Layout,QL200 Board Schematic,Sample code(C/ASM),MPLAB 7.50.)
* Compatible for OS including Windows 98,Windows 2000/NT,Windows XP,Windows 2003 and Vista
* Dupont thread expansion connection 20x wire
* 12864-Graphic LCD Display Yellow Backlight
* 10-bit D/A converter TLC5615(DIP8 package)*1
* DS18B20(DS1820)Temperature Sensor(TO-92 package)*1
Sample with C and ASM Program sources code as below:
* DS1820
* Buzzer
* 128x64 GLCD(See the following Photos)
* 1602 LCD(See the following Photos)
* 93C46
* 24C02
* 4x4 Key testing
* 8x LED
* 7x segment
* ADC/DAC
* Infrared Remote
* Stepper motor driver
* MMCSD card Read/Write(Only have C)
