分享点经验----如何在adobe audition里让自己的声音听起来更好听
1. make sure all input device and the software uses the same frequency, 48000 is fine
2. Filter and EQ --> graphic equalizer (20 bands) ---> create a little tide on mid-high sections (like 5.6%) and smooth it in ====>> this makes mid-high sections a little bit higher and more pronounced than other sections
3. Filter and EQ --> parametric equalizer ----> go to preset and got to loudness maximizer ----> increase the 100 Hz a bit, (optional: make 800 Hz a bit lower, and taper it off） =====>> add in some depths to lows
4. amplitude and compression --> hard limter --> limits to -1d --> change the maximium amplitude to -2
5. noise reduction :
1. noise reduction: 89% ; noise reduced by: 11db
2. advanced: spectral decay rate: 65%; smoothing: 1 ; precision factor: 7; transition width: 3db
3. noise print capture setting: FFT size: 4096
2. Filter and EQ --> graphic equalizer (20 bands) ---> create a little tide on mid-high sections (like 5.6%) and smooth it in ====>> this makes mid-high sections a little bit higher and more pronounced than other sections
3. Filter and EQ --> parametric equalizer ----> go to preset and got to loudness maximizer ----> increase the 100 Hz a bit, (optional: make 800 Hz a bit lower, and taper it off） =====>> add in some depths to lows
4. amplitude and compression --> hard limter --> limits to -1d --> change the maximium amplitude to -2
5. noise reduction :
1. noise reduction: 89% ; noise reduced by: 11db
2. advanced: spectral decay rate: 65%; smoothing: 1 ; precision factor: 7; transition width: 3db
3. noise print capture setting: FFT size: 4096
